The JF-QT5-20T type automatic tile molding machine 
 (A) the main technical parameters: 
 No project parameters 
 A shock shock force 78KN 
 2 vibration frequency 5000 times / min 
 3 the amplitude of 15mm 
 4 noise 85db or (A) 
 7 seconds / 5 vibration 
 6 Dimension 3000 * 2200 * 2900 (mm) 
 7 installed capacity 31.7KW 
 8 whole weight of 8 tons 
 9 the maximum pressure of 300 tons 
 10 pallet size 1150 * 880 * 30 (mm) 
 11 operation number 10 
 12 land area than 5000 square meters 

 (B) the amount of brick and yield: 
 Products Specification L * W * H (mm) forming the number of hourly production production cycle 
 Standard brick 240 * 115 * 53 28 5600 18 seconds / 
 Bread brick 100 * 200 * 60 5 2880 20 seconds / 
 S brick 225 * 112.5 * 60 16 2880 20 seconds / 

 (C) The device features: 
 1, using a combination of theory of vibration and pressure of Jianpeng preaching vibration effect is more remarkable products better density; 
 2, the reciprocating Plectrum forced fabrics, rapid and uniform; 
 3, shock shock with hydraulic combined to ensure uniform density of the products; 
 Automatic control, the use of Japan's imports of computer PLC control, mechanical vibration and hydraulic closely with, high yield, low failure rate; 
 5, fly ash, slag, coal gangue and other industrial wastes can be used as raw materials, the residue doped up to 75%; 
 6, supporting automatic stacker, making to improve production efficiency and greatly reduce the labor intensity of labor-saving; 
 7, on the basis of the original shock press 400 tons of the main cylinder, strong suppression of normal shock pressure molding, large tonnage, allowing for higher density to solve the general machinery using fly ash and tailings sand and other fine material as raw material, pressed brick density of low intensity of less than the shortcomings.